Industrial edge computing
that keeps your data in your plant.
Run AI where your machines are. No cloud dependency. No latency. No data leaks. iGromi OS processes everything on the edge — your plant, your rules.
Why Edge
Why send your data to the cloud
when you can process it here?
Cloud latency
A production line cannot wait for the cloud. Sending every signal out and waiting for the answer adds the network round trip. At the edge, data is processed where it is produced — on your machine, in your plant.
Internet dependency
What happens when the connection drops? With cloud-dependent systems, your AI stops. iGromi OS runs offline. Your plant keeps working.
Data sovereignty
Your video is processed at the plant and the context stays in your own iGromi engine; an AI model only receives the question with what it needs. No third party trains models on your operations.
What runs on the edge
1 · Your sources
- PLCs and drives: Modbus, S7, EtherNet/IP
- Sensors and meters
- IP cameras
2 · The edge node on site
- Translates protocols into one language
- Filters and aggregates before sending anything
- Stores locally if the link drops
3 · Where it goes
- Your systems: MES, ERP or SCADA
- Dashboards on the plant floor
- The cloud, only if you decide so
Deploy edge AI
in hours, not months.
iGromi OS connects to your existing infrastructure — cameras, PLCs, sensors — without replacing anything. We'll show you how in 30 minutes.
Book a diagnosticHow is this rolled out in a plant that is already running?
The same five questions come up in every meeting, whichever solution is on the table. The answers depend on how the system works, not on the module.
Do I have to replace my PLC or my SCADA?
No. The system connects to what is already installed and reads from it; it does not replace the control layer and does not write to it unless that is explicitly defined. If the PLC does not expose its parameters, the iGromi Bridge discovers them by trying combinations until it gets a response, and if the machine speaks no protocol at all it is read by a sensor on the electrical signal.
Does it work if the internet goes down?
Yes. Processing happens at the Edge, inside the plant, so capture, rules and inference keep running with the link down. What stops is remote access and outbound synchronisation, which resumes on its own when the connection returns.
Does my data leave the plant?
Not by default. Video and telemetry are processed on the customer's Edge device. What leaves, and where it goes, is defined when the system is configured. That is the same property that underpins compliance with Chile's Ley 21.719 and what makes this viable in mining and in food.
How long until the first data point?
It depends on how many machines there are and what they expose. A line with equipment that speaks Modbus is read in days; a line of silent machines needs sensors installed and panel shutdowns coordinated, and that is set by the plant's maintenance calendar, not by us. The usual sequence is assessment, pilot, expansion.
What happens to what we already measure by hand?
It runs alongside during commissioning. For the first weeks the manual record keeps going in parallel as a validation counterpart: it is how you find out whether the automatic figure beats the handwritten one, and the habit is dropped on its own once that is demonstrated.
Related solutions
On-premise AI
Industrial IoT gateway
Hardware and software that connects legacy machines to edge or cloud systems.
Industrial IoT platform
Connect sensors, gateways and actuators in a single data layer.